DeeoK
Posts: 12
Joined: Sat Sep 02, 2017 2:10 pm

No boot options at startup

Sat Jan 20, 2018 2:19 pm

I have a dual boot with Solus and Windows 10.
When EFI boots I have only the Linux Boot Manager option and selecting it Solus starts without asking anything.
How can I boot into Windows?

User avatar
hinoki
Posts: 47
Joined: Wed Apr 19, 2017 1:50 pm

Re: No boot options at startup

Sat Jan 20, 2018 3:49 pm

Run

Code: Select all

sudo clr-boot-manager update
and reboot.

User avatar
kyrios
Posts: 1858
Joined: Thu Sep 22, 2016 4:20 pm

Re: No boot options at startup

Sat Jan 20, 2018 4:35 pm

DeeoK wrote:
Sat Jan 20, 2018 2:19 pm
I have a dual boot with Solus and Windows 10.
When EFI boots I have only the Linux Boot Manager option and selecting it Solus starts without asking anything.
How can I boot into Windows?
Check this article on the help center.

DeeoK
Posts: 12
Joined: Sat Sep 02, 2017 2:10 pm

Re: No boot options at startup

Sat Jan 20, 2018 6:48 pm

hinoki wrote:
Sat Jan 20, 2018 3:49 pm
Run

Code: Select all

sudo clr-boot-manager update
and reboot.
[FATAL] cbm (src/bootman/kernel.c:L629): Failed to install kernel /boot/EFI/com.solus-project/kernel-com.solus-project.current.4.14.14-47: No space left on device
[FATAL] cbm (src/bootman/update.c:L329): Failed to install default-current kernel: ///usr/lib/kernel/com.solus-project.current.4.14.14-47
I don't understand: I have 100MB in /dev/sdc2 (the boot partition) with 94 MB used but I have only Solus and W10. With other distros I don't remember similar problems.

By the way, I had already tried to change the timer without success (because I doesn't have update the boot manager) but pressing space I'm now able to boot into Windows (and now the Windows entry appear in the boot options of the motherbord).

User avatar
kyrios
Posts: 1858
Joined: Thu Sep 22, 2016 4:20 pm

Re: No boot options at startup

Sat Jan 20, 2018 8:12 pm

DeeoK wrote:
Sat Jan 20, 2018 6:48 pm
[FATAL] cbm (src/bootman/kernel.c:L629): Failed to install kernel /boot/EFI/com.solus-project/kernel-com.solus-project.current.4.14.14-47: No space left on device
[FATAL] cbm (src/bootman/update.c:L329): Failed to install default-current kernel: ///usr/lib/kernel/com.solus-project.current.4.14.14-47
I don't understand: I have 100MB in /dev/sdc2 (the boot partition) with 94 MB used but I have only Solus and W10. With other distros I don't remember similar problems.

By the way, I had already tried to change the timer without success (because I doesn't have update the boot manager) but pressing space I'm now able to boot into Windows (and now the Windows entry appear in the boot options of the motherbord).
The error message is pretty obvious "No space left on device". 100Mb is too small, the partition should be 512Mb

DeeoK
Posts: 12
Joined: Sat Sep 02, 2017 2:10 pm

Re: No boot options at startup

Wed Feb 07, 2018 2:31 pm

kyrios wrote:
Sat Jan 20, 2018 8:12 pm
DeeoK wrote:
Sat Jan 20, 2018 6:48 pm
[FATAL] cbm (src/bootman/kernel.c:L629): Failed to install kernel /boot/EFI/com.solus-project/kernel-com.solus-project.current.4.14.14-47: No space left on device
[FATAL] cbm (src/bootman/update.c:L329): Failed to install default-current kernel: ///usr/lib/kernel/com.solus-project.current.4.14.14-47
I don't understand: I have 100MB in /dev/sdc2 (the boot partition) with 94 MB used but I have only Solus and W10. With other distros I don't remember similar problems.

By the way, I had already tried to change the timer without success (because I doesn't have update the boot manager) but pressing space I'm now able to boot into Windows (and now the Windows entry appear in the boot options of the motherbord).
The error message is pretty obvious "No space left on device". 100Mb is too small, the partition should be 512Mb
Do you know if it is possible to move the actual content of the boot partition into another partition?
My boot partition was created automatically by Windows and now it's "blocked" between two other partition with no way to resize it. What I want to do is to create a new partition and use it as boot partition but I don't know if it is enough to copy and paste the content of the old partition into the new one.

Return to “Installation”