User avatar
Faults
Posts: 4
Joined: Tue Oct 17, 2017 6:23 am

Custom Resolution - Persistent

Thu Dec 14, 2017 9:01 am

I have bit strange display. Its 4K (3840 x 2160) 15" laptop screen, but without most common 1920 x 1080 Resolution. This FullHD would be most preferably for gaming as 1050 Ti can't really run most games on 4K resolution. Full HD does not screw the aspect ratios.

SO! I with my limited skills I have done following:

1)

Code: Select all

cvt 1920 1080
2)

Code: Select all

sudo xrandr --newmode "1920x1080_60.00"  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync
3)

Code: Select all

sudo xrandr --addmode eDP-1-1 "1920x1080_60.00"

Aye! It adds the Resolution nicely! After boot its gone. SO:


1) I added Budgie Startup command:

Code: Select all

xrandr --newmode "1920x1080_60.00"  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync
2) I added second Budgie Startup command:

Code: Select all

xrandr --addmode eDP-1-1 "1920x1080_60.00"

Aye! I solved it.... almost. Now and then, I don't know why, but this stops working. Then I remove the startup commands and I do whole thing again.

I'm close, but I'm sure that there is much better way to have this 1920 x 1080 resolution added Permanently. Can you help me a bit?



System: Host: bebop Kernel: 4.14.5-39.current x86_64 bits: 64 gcc: 7.2.0 Desktop: Budgie 10.4
Distro: Solus 3
Machine: Device: laptop System: Dell product: Inspiron 15 7000 Gaming serial: N/A
Mobo: Dell model: 065C71 v: X02 serial: N/A UEFI: Dell v: 1.2.0 date: 10/06/2017
Battery BAT0: charge: 58.8 Wh 100.0% condition: 58.8/74.0 Wh (79%)
model: Samsung SDI DELL 0GFJ66C status: Full
CPU: Quad core Intel Core i7-7700HQ (-HT-MCP-) arch: Skylake rev.9 cache: 6144 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 22464
clock speeds: max: 3800 MHz 1: 2800 MHz 2: 2800 MHz 3: 2800 MHz 4: 2800 MHz 5: 2800 MHz 6: 2800 MHz
7: 2800 MHz 8: 2800 MHz
Graphics: Card-1: Intel Device 591b bus-ID: 00:02.0
Card-2: NVIDIA GP107M [GeForce GTX 1050 Ti Mobile] bus-ID: 01:00.0
Display Server: x11 (X.Org 1.19.5 ) drivers: modesetting,nvidia Resolution: 3840x2160@60.00hz
OpenGL: renderer: GeForce GTX 1050 Ti/PCIe/SSE2 version: 4.5.0 NVIDIA 384.98 Direct Render: Yes
Audio: Card Intel CM238 HD Audio Controller driver: snd_hda_intel bus-ID: 00:1f.3
Sound: Advanced Linux Sound Architecture v: k4.14.5-39.current
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: d000 bus-ID: 02:00.0
IF: enp2s0 state: down mac: d4:81:d7:98:7a:57
Card-2: Intel Wireless 8265 / 8275 driver: iwlwifi bus-ID: 03:00.0
IF: wlp3s0 state: up mac: 00:28:f8:2f:04:86
Drives: HDD Total Size: 762.2GB (55.6% used)
ID-1: /dev/nvme0n1 model: Samsung_SSD_960_PRO_512GB size: 512.1GB
ID-2: /dev/sda model: Samsung_SSD_850 size: 250.1GB
Partition: ID-1: / size: 465G used: 232G (53%) fs: ext4 dev: /dev/nvme0n1p3
ID-2: swap-1 size: 4.00GB used: 0.00GB (0%) fs: swap dev: /dev/nvme0n1p2
Sensors: System Temperatures: cpu: 55.0C mobo: N/A gpu: 0.0:54C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 256 Uptime: 15 min Memory: 2645.8/15977.2MB Init: systemd Gcc sys: 7.2.0
Client: Shell (bash 4.4.01) inxi: 2.3.38

Return to “Hardware”