Posts: 3
Joined: Wed Jan 24, 2018 10:35 am

No display choices using USB-C for external projector

Mon Mar 05, 2018 12:36 pm

The subject says it all... here are my details:

Code: Select all

System:    Host: zenbook Kernel: 4.15.7-60.current x86_64 bits: 64 gcc: 7.3.0
           Desktop: Budgie 10.4  Distro: Solus 3.99
Machine:   Device: laptop System: ASUSTeK product: UX330UAR v: 1.0 serial: N/A
           Mobo: ASUSTeK model: UX330UAR v: 1.0 serial: N/A
           UEFI: American Megatrends v: UX330UAR.300 date: 08/03/2017
Battery    BAT0: charge: 48.4 Wh 84.8% condition: 57.1/57.1 Wh (100%)
           model: ASUSTeK ASUS status: Discharging
CPU:       Quad core Intel Core i5-8250U (-HT-MCP-) 
           arch: Kaby Lake rev.10 cache: 6144 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 14400
           clock speeds: max: 3400 MHz 1: 800 MHz 2: 800 MHz 3: 801 MHz
           4: 800 MHz 5: 800 MHz 6: 800 MHz 7: 800 MHz 8: 800 MHz
Graphics:  Card: Intel Device 5917 bus-ID: 00:02.0
           Display Server: x11 (X.Org 1.19.6 )
           drivers: modesetting (unloaded: fbdev,vesa)
           Resolution: 1920x1080@60.05hz
           OpenGL: renderer: Mesa DRI Intel UHD Graphics 620 (Kabylake GT2)
           version: 4.5 Mesa 17.3.6 Direct Render: Yes
Audio:     Card Intel Sunrise Point-LP HD Audio
           driver: snd_hda_intel bus-ID: 00:1f.3
           Sound: Advanced Linux Sound Architecture v: k4.15.7-60.current
Network:   Card: Intel Wireless 8260 driver: iwlwifi bus-ID: 02:00.0
           IF: wlp2s0 state: up mac: f8:94:c2:29:68:af
Drives:    HDD Total Size: 256.1GB (4.6% used)
           ID-1: /dev/sda model: Micron_1100_MTFD size: 256.1GB
Partition: ID-1: / size: 230G used: 7.5G (4%) fs: ext4 dev: /dev/sda3
           ID-2: swap-1 size: 4.00GB used: 0.00GB (0%)
           fs: swap dev: /dev/sda2
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 230 Uptime: 9 min Memory: 1166.4/7925.3MB
           Init: systemd Gcc sys: N/A
           Client: Shell (bash 4.4.181) inxi: 2.3.38

Return to “Hardware”