Page 1 of 3

[SOLVED] Is it possible to get a Broadcom BCM4360 working?

Posted: Wed Mar 29, 2017 8:52 pm
by jonrs
Hi
I just tried a live USB installation of Solus and there where no network cards there at all. I have a bcm4360 (macbook air) which is currently not supported.
Is there any way I can get this working?
On a ubuntu 16.10 I can install the bcmwl-kernel-source and that solves the problem. I guess that would not work on Solus.
Thanx

Jon

Re: Is it possible to get a Broadcom BCM4360 working?

Posted: Wed Mar 29, 2017 11:30 pm
by sunnyflunk
jonrs wrote:
Wed Mar 29, 2017 8:52 pm
Hi
I just tried a live USB installation of Solus and there where no network cards there at all. I have a bcm4360 (macbook air) which is currently not supported.
Is there any way I can get this working?
On a ubuntu 16.10 I can install the bcmwl-kernel-source and that solves the problem. I guess that would not work on Solus.
Thanx

Jon
There is a 'broadcom-sta' package available in the repo for handling broadcom devices. It would require a system update though as the kernel version needs to match the broadcom-sta package it was built for. It will be much easier after a new ISO (coming soon) where you could copy the broadcom-sta package via usb to make networking usable.

Re: Is it possible to get a Broadcom BCM4360 working?

Posted: Thu Mar 30, 2017 8:40 am
by jonrs
Thank you. The sta-drivers don`t work for me in Ubuntu, thats why I use the bcmwl-kernel-source. Do you think they will work in Solus?
Will it be easier to do this if I do a full install first? I can connect to internet via the ethernet card. Probably.

Jon

Re: Is it possible to get a Broadcom BCM4360 working?

Posted: Thu Mar 30, 2017 7:46 pm
by jonrs
I discovered that there is an application called "Hardware drivers". Excellent!
The Broadcom wifi is there and ready to install but it just hangs on the installation screen. Maybe because its a live usb.
I would try this from a normal installation if I could, but Solus doesn't see my SSD disk so I cant install it. Mentioned it in another related thread.
Too bad, Solus seems very promising.

Jon

Re: Is it possible to get a Broadcom BCM4360 working?

Posted: Thu Mar 30, 2017 8:05 pm
by TeleSkope21
jonrs wrote:
Thu Mar 30, 2017 7:46 pm
I discovered that there is an application called "Hardware drivers". Excellent!
The Broadcom wifi is there and ready to install but it just hangs on the installation screen. Maybe because its a live usb.
I would try this from a normal installation if I could, but Solus doesn't see my SSD disk so I cant install it. Mentioned it in another related thread.
Too bad, Solus seems very promising.

Jon
Hardware drivers is installing the broadcom-sta driver...

Re: Is it possible to get a Broadcom BCM4360 working?

Posted: Fri Mar 31, 2017 4:07 am
by geoffrey.A
There is an alternative . . . . a linux compatible usb wifi adaptor.

The Panda devices are very linux friendly . . . the ultra 150 n is plug & play on a wide variety of Linux distros.

http://www.pandawireless.com/

Re: Is it possible to get a Broadcom BCM4360 working?

Posted: Fri Mar 31, 2017 6:55 pm
by jonrs
geoffrey.A wrote:
Fri Mar 31, 2017 4:07 am
There is an alternative . . . . a linux compatible usb wifi adaptor.
Thanx for the tip, but I´ll rather go for another distro than install external equipment.
I´ll try to install Solus again later. :)

Jon

Re: Is it possible to get a Broadcom BCM4360 working?

Posted: Fri Mar 31, 2017 7:47 pm
by TeleSkope21
jonrs wrote:
Wed Mar 29, 2017 8:52 pm
Hi
I just tried a live USB installation of Solus and there where no network cards there at all. I have a bcm4360 (macbook air) which is currently not supported.
Is there any way I can get this working?
On a ubuntu 16.10 I can install the bcmwl-kernel-source and that solves the problem. I guess that would not work on Solus.
Thanx

Jon
My Broadcom BCM43225 802.11b/g/n is also no more working...

Re: Is it possible to get a Broadcom BCM4360 working?

Posted: Mon Apr 03, 2017 9:34 pm
by jonrs
TeleSkope21 wrote:
Thu Mar 30, 2017 8:05 pm
Hardware drivers is installing the broadcom-sta driver...
The sta driver seems to work.
Since Solus doesn´t see my SSD I installed it to an external USB. I installed all the system updates and then the driver in "Hardware drivers", and after a restart the wifi works. Great!
Now on to the invisible SSD...

Jon

Re: Is it possible to get a Broadcom BCM4360 working?

Posted: Tue Apr 04, 2017 4:49 pm
by TeleSkope21
jonrs wrote:
Mon Apr 03, 2017 9:34 pm
TeleSkope21 wrote:
Thu Mar 30, 2017 8:05 pm
Hardware drivers is installing the broadcom-sta driver...
The sta driver seems to work.
Since Solus doesn´t see my SSD I installed it to an external USB. I installed all the system updates and then the driver in "Hardware drivers", and after a restart the wifi works. Great!
Now on to the invisible SSD...

Jon
yes the newest update is working... but the update before was a fail xD (but Hardware drivers is installing the driver wich is in the software center to...)