sunnyflunk
Development Team
Posts: 2874
Joined: Sun Mar 13, 2016 11:35 pm

Re: Solus - Epson L365: printing and scanning

Thu Jan 25, 2018 12:01 am

crom5 wrote:
Wed Jan 24, 2018 12:13 pm
Thank you very much for your reply. Do I need to use your version of utsushi or graphicsmagick? Or both?

https://www.dropbox.com/sh/3jwzz3ncfm4u ... eopkg?dl=0
https://www.dropbox.com/sh/j3yo6sm0epnm ... eopkg?dl=0

sudo eopkg install ~/Downloads/utsushi-3.32.0-4-1-x86_64.eopkg
sudo eopkg install ~/Downloads/graphicsmagick-1.3.26-12-1-x86_64.eopkg

All the above are correct?
Also, I must exclude utsushi/graphicsmagick from general updating?
graphicsmagick should be the only one that needs installing (but install utsushi as well if it doesn't work).

When this task is resolved, then updating will be fine https://dev.solus-project.com/T4163

crom5
Posts: 59
Joined: Mon May 15, 2017 1:59 pm
Contact: Website

Re: Solus - Epson L365: printing and scanning

Fri Mar 02, 2018 10:09 am

Hello, my Solus is now fully updated and my Epson L365 scanner finally works correctly - thank you very much for your help.
But there's another new little problem: when I launch utsushi, it says that no device is connected. So I must restart my machine (with scanner turned on and connected via usb), and only after that utsushi see my scanner and works fine.

sunnyflunk
Development Team
Posts: 2874
Joined: Sun Mar 13, 2016 11:35 pm

Re: Solus - Epson L365: printing and scanning

Fri Mar 02, 2018 10:51 am

crom5 wrote:
Fri Mar 02, 2018 10:09 am
Hello, my Solus is now fully updated and my Epson L365 scanner finally works correctly - thank you very much for your help.
But there's another new little problem: when I launch utsushi, it says that no device is connected. So I must restart my machine (with scanner turned on and connected via usb), and only after that utsushi see my scanner and works fine.
Can you add it to the Phabricator task?

crom5
Posts: 59
Joined: Mon May 15, 2017 1:59 pm
Contact: Website

Re: Solus - Epson L365: printing and scanning

Fri Mar 02, 2018 11:24 am

Here
https://dev.solus-project.com/T4899
or should I open the new one?

crom5
Posts: 59
Joined: Mon May 15, 2017 1:59 pm
Contact: Website

Re: Solus - Epson L365: printing and scanning

Fri Mar 02, 2018 1:58 pm

Here it is: "utsushi is not detecting scanner device"
https://dev.solus-project.com/T5967

Return to “Hardware”