betterunborn
Posts: 7
Joined: Wed Jul 26, 2017 7:35 pm

Sound output over HDMI lost (Radeon R270)

Sat Aug 04, 2018 4:49 pm

Hi all,

it must have happened with a very recent update, but all of the sudden my sound output over HDMI is lost. It definitely worked a few weeks ago, as it had worked out-of-the-box when installing.
Graphics card: Radeon X270
In Pulseaudio volume control (pavucontrol) I can still see a "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]" entry, but all Profile options inside are marked as (unavailable) ... selecting them yields nothing.
I already tried kernel parameter "amdgpu.dc=0" and "amdgpu.dc=1", both had no effect.

lspci -v lists them as following:

Code: Select all

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Curacao PRO [Radeon R7 370 / R9 270/370 OEM] (prog-if 00 [VGA controller])
	Subsystem: Hightech Information System Ltd. Curacao PRO [Radeon R7 370 / R9 270/370 OEM]
	Flags: bus master, fast devsel, latency 0, IRQ 34
	Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Memory at f7e00000 (64-bit, non-prefetchable) [size=256K]
	I/O ports at e000 [size=256]
	Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: [48] Vendor Specific Information: Len=08 <?>
	Capabilities: [50] Power Management version 3
	Capabilities: [58] Express Legacy Endpoint, MSI 00
	Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
	Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
	Capabilities: [150] Advanced Error Reporting
	Capabilities: [200] #15
	Capabilities: [270] #19
	Capabilities: [2b0] Address Translation Service (ATS)
	Capabilities: [2c0] Page Request Interface (PRI)
	Capabilities: [2d0] Process Address Space ID (PASID)
	Kernel driver in use: amdgpu

01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]
	Subsystem: Hightech Information System Ltd. Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]
	Flags: bus master, fast devsel, latency 0, IRQ 33
	Memory at f7e60000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [48] Vendor Specific Information: Len=08 <?>
	Capabilities: [50] Power Management version 3
	Capabilities: [58] Express Legacy Endpoint, MSI 00
	Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
	Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
	Capabilities: [150] Advanced Error Reporting
	Kernel driver in use: snd_hda_intel

Anyone facing the same or any more ideas to try out?

Thanks in advance ...

betterunborn
Posts: 7
Joined: Wed Jul 26, 2017 7:35 pm

Re: Sound output over HDMI lost (Radeon R270)

Sat Aug 04, 2018 5:04 pm

Forgot the most important part ... here's my dmesg pt1 ...

Code: Select all

[    0.000000] microcode: microcode updated early to revision 0x24, date = 2018-01-21
[    0.000000] Linux version 4.17.11-84.current (root@builder.solus-project.com) (gcc version 7.3.0 (Solus)) #1 SMP PREEMPT Sat Jul 28 13:53:22 UTC 2018
[    0.000000] Command line: initrd=\EFI\com.solus-project\initrd-com.solus-project.current.4.17.11-84 root=PARTUUID=70f8b968-6928-4888-8df1-08667ae3a4dc quiet loglevel=3 splash systemd.show_status=false rw radeon.si_support=0 radeon.cik_support=0 amdgpu.si_support=1 amdgpu.cik_support=1 amdgpu.dc=0
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be0f7fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000be0f8000-0x00000000be0fefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000be0ff000-0x00000000be561fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000be562000-0x00000000be9b2fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000be9b3000-0x00000000ddab5fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ddab6000-0x00000000ddb1efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ddb1f000-0x00000000ddb3cfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000ddb3d000-0x00000000de060fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000de061000-0x00000000deffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0xbc0c8018-0xbc0e6057] usable ==> usable
[    0.000000] e820: update [mem 0xbc0c8018-0xbc0e6057] usable ==> usable
[    0.000000] e820: update [mem 0xbc0ba018-0xbc0c7857] usable ==> usable
[    0.000000] e820: update [mem 0xbc0ba018-0xbc0c7857] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000bc0ba017] usable
[    0.000000] reserve setup_data: [mem 0x00000000bc0ba018-0x00000000bc0c7857] usable
[    0.000000] reserve setup_data: [mem 0x00000000bc0c7858-0x00000000bc0c8017] usable
[    0.000000] reserve setup_data: [mem 0x00000000bc0c8018-0x00000000bc0e6057] usable
[    0.000000] reserve setup_data: [mem 0x00000000bc0e6058-0x00000000be0f7fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000be0f8000-0x00000000be0fefff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000be0ff000-0x00000000be561fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000be562000-0x00000000be9b2fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000be9b3000-0x00000000ddab5fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000ddab6000-0x00000000ddb1efff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ddb1f000-0x00000000ddb3cfff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000ddb3d000-0x00000000de060fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000de061000-0x00000000deffefff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000defff000-0x00000000deffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000041effffff] usable
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ESRT=0xdef57898  ACPI 2.0=0xddb26000  ACPI=0xddb26000  SMBIOS=0xf04d0  MPS=0xfd5d0 
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: ASUS All Series/Z97-P, BIOS 2803 05/21/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x41f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7C00000000 write-back
[    0.000000]   1 base 0400000000 mask 7FF0000000 write-back
[    0.000000]   2 base 0410000000 mask 7FF8000000 write-back
[    0.000000]   3 base 0418000000 mask 7FFC000000 write-back
[    0.000000]   4 base 041C000000 mask 7FFE000000 write-back
[    0.000000]   5 base 041E000000 mask 7FFF000000 write-back
[    0.000000]   6 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] mapped at [        (ptrval)]
[    0.000000] esrt: Reserving ESRT space from 0x00000000def57898 to 0x00000000def578d0.
[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x02913000, 0x02913fff] PGTABLE
[    0.000000] BRK [0x02914000, 0x02914fff] PGTABLE
[    0.000000] BRK [0x02915000, 0x02915fff] PGTABLE
[    0.000000] BRK [0x02916000, 0x02916fff] PGTABLE
[    0.000000] BRK [0x02917000, 0x02917fff] PGTABLE
[    0.000000] BRK [0x02918000, 0x02918fff] PGTABLE
[    0.000000] Secure boot disabled
[    0.000000] RAMDISK: [mem 0x7e676000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000DDB26000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000DDB26088 00008C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DDB35000 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DDB261B0 00EE4A (v02 ALASKA A M I    00000011 INTL 20120711)
[    0.000000] ACPI: FACS 0x00000000DE060F80 000040
[    0.000000] ACPI: APIC 0x00000000DDB35110 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DDB35188 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000DDB351D0 000C7D (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DDB35E50 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000DDB36390 000B74 (v01 CpuRef CpuSsdt  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000DDB36F08 0001C7 (v01 PmRef  LakeTiny 00003000 INTL 20051117)
[    0.000000] ACPI: MCFG 0x00000000DDB370D0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DDB37110 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DDB37148 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DDB374B8 005977 (v01 SaSsdt SaSsdt   00003000 INTL 20120711)
[    0.000000] ACPI: DMAR 0x00000000DDB3CED0 000080 (v01 INTEL  BDW      00000001 INTL 00000001)
[    0.000000] ACPI: UEFI 0x00000000DDB3CE88 000042 (v01 ALASKA A M I    01072009      00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000041effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x41eff9000-0x41effafff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000041effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000be0f7fff]
[    0.000000]   node   0: [mem 0x00000000be0ff000-0x00000000be561fff]
[    0.000000]   node   0: [mem 0x00000000be9b3000-0x00000000ddab5fff]
[    0.000000]   node   0: [mem 0x00000000defff000-0x00000000deffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000041effffff]
[    0.000000] Reserved but unavailable: 10756 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041effffff]
[    0.000000] On node 0 totalpages: 4179452
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 24 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14106 pages used for memmap
[    0.000000]   DMA32 zone: 902751 pages, LIFO batch:31
[    0.000000]   Normal zone: 51136 pages used for memmap
[    0.000000]   Normal zone: 3272704 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbc0ba000-0xbc0bafff]
[    0.000000] PM: Registered nosave memory: [mem 0xbc0c7000-0xbc0c7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbc0c8000-0xbc0c8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbc0e6000-0xbc0e6fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbe0f8000-0xbe0fefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbe562000-0xbe9b2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xddab6000-0xddb1efff]
[    0.000000] PM: Registered nosave memory: [mem 0xddb1f000-0xddb3cfff]
[    0.000000] PM: Registered nosave memory: [mem 0xddb3d000-0xde060fff]
[    0.000000] PM: Registered nosave memory: [mem 0xde061000-0xdeffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x86/0x509 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:48 nr_cpumask_bits:48 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 44 pages/cpu @        (ptrval) s141720 r8192 d30312 u524288
[    0.000000] pcpu-alloc: s141720 r8192 d30312 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4114122
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: initrd=\EFI\com.solus-project\initrd-com.solus-project.current.4.17.11-84 root=PARTUUID=70f8b968-6928-4888-8df1-08667ae3a4dc quiet loglevel=3 splash systemd.show_status=false rw radeon.si_support=0 radeon.cik_support=0 amdgpu.si_support=1 amdgpu.cik_support=1 amdgpu.dc=0
[    0.000000] Memory: 16030496K/16717808K available (12300K kernel code, 1286K rwdata, 2592K rodata, 1528K init, 552K bss, 687312K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 37071 entries in 145 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=48 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: (none).
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180313
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] DMAR: Host address width 39
[    0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[    0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.000000] DMAR: RMRR base: 0x000000dee7b000 end: 0x000000dee89fff
[    0.000000] DMAR-IR: IOAPIC id 8 under DRHD base  0xfed90000 IOMMU 0
[    0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[    0.000000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.000000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.000000] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.005000] tsc: Fast TSC calibration using PIT
[    0.006000] tsc: Detected 3198.343 MHz processor
[    0.006000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e1a2cebd50, max_idle_ns: 440795297394 ns
[    0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6396.68 BogoMIPS (lpj=3198343)
[    0.006000] pid_max: default: 32768 minimum: 301
[    0.006000] Security Framework initialized
[    0.006000] Yama: becoming mindful.
[    0.006000] AppArmor: AppArmor initialized
[    0.009731] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.011201] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.011257] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.011303] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.011446] CPU: Physical Processor ID: 0
[    0.011447] CPU: Processor Core ID: 0
[    0.011451] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.011452] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.011455] mce: CPU supports 9 MCE banks
[    0.011462] CPU0: Thermal monitoring enabled (TM1)
[    0.011474] process: using mwait in idle threads
[    0.011475] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.011476] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.011478] Spectre V2 : Mitigation: Full generic retpoline
[    0.011478] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.011478] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.011479] Speculative Store Bypass: Vulnerable
[    0.011552] Freeing SMP alternatives memory: 36K
[    0.018678] TSC deadline timer enabled
[    0.018681] smpboot: CPU0: Intel(R) Core(TM) i5-4460  CPU @ 3.20GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.023017] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.023049] ... version:                3
[    0.023049] ... bit width:              48
[    0.023050] ... generic registers:      8
[    0.023050] ... value mask:             0000ffffffffffff
[    0.023051] ... max period:             00007fffffffffff
[    0.023051] ... fixed-purpose events:   3
[    0.023052] ... event mask:             00000007000000ff
[    0.024004] Hierarchical SRCU implementation.
[    0.026102] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.027006] smp: Bringing up secondary CPUs ...
[    0.033020] x86: Booting SMP configuration:
[    0.033021] .... node  #0, CPUs:      #1 #2 #3
[    0.038020] smp: Brought up 1 node, 4 CPUs
[    0.038020] smpboot: Max logical packages: 1
[    0.038020] smpboot: Total of 4 processors activated (25586.74 BogoMIPS)
[    0.039288] devtmpfs: initialized
[    0.039288] PM: Registering ACPI NVS region [mem 0xbe0f8000-0xbe0fefff] (28672 bytes)
[    0.039288] PM: Registering ACPI NVS region [mem 0xddb3d000-0xde060fff] (5390336 bytes)
[    0.039288] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.039288] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.039288] xor: automatically using best checksumming function   avx       
[    0.039288] pinctrl core: initialized pinctrl subsystem
[    0.039288] NET: Registered protocol family 16
[    0.039288] audit: initializing netlink subsys (disabled)
[    0.039288] audit: type=2000 audit(1533403942.039:1): state=initialized audit_enabled=0 res=1
[    0.039288] cpuidle: using governor ladder
[    0.039288] cpuidle: using governor menu
[    0.039288] ACPI: bus type PCI registered
[    0.039288] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.040019] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.040021] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.040025] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[    0.040074] PCI: Using configuration type 1 for base access
[    0.040114] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.040691] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.040691] cryptd: max_cpu_qlen set to 1000
[    0.056009] raid6: sse2x1   gen() 11480 MB/s
[    0.073010] raid6: sse2x1   xor()  8107 MB/s
[    0.090017] raid6: sse2x2   gen() 13410 MB/s
[    0.107019] raid6: sse2x2   xor()  8884 MB/s
[    0.124023] raid6: sse2x4   gen() 16171 MB/s
[    0.141026] raid6: sse2x4   xor() 10095 MB/s
[    0.158030] raid6: avx2x1   gen() 22351 MB/s
[    0.175033] raid6: avx2x1   xor() 15406 MB/s
[    0.192037] raid6: avx2x2   gen() 25792 MB/s
[    0.209039] raid6: avx2x2   xor() 16232 MB/s
[    0.226044] raid6: avx2x4   gen() 30210 MB/s
[    0.243046] raid6: avx2x4   xor() 18271 MB/s
[    0.243047] raid6: using algorithm avx2x4 gen() 30210 MB/s
[    0.243048] raid6: .... xor() 18271 MB/s, rmw enabled
[    0.243048] raid6: using avx2x2 recovery algorithm
[    0.244002] ACPI: Added _OSI(Module Device)
[    0.244002] ACPI: Added _OSI(Processor Device)
[    0.244002] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.244002] ACPI: Added _OSI(Processor Aggregator Device)
[    0.244002] ACPI: Added _OSI(Linux-Dell-Video)
[    0.245264] ACPI Error: Result stack is empty! State=        (ptrval) (20180313/dswstate-65)
[    0.245267] ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20180313/dsutils-612)
[    0.245269] ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20180313/dsutils-727)
[    0.245294] ACPI Error: Result stack is empty! State=        (ptrval) (20180313/dswstate-65)
[    0.245296] ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20180313/dsutils-612)
[    0.245297] ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20180313/dsutils-727)
[    0.245299] ACPI Error: Result stack is empty! State=        (ptrval) (20180313/dswstate-65)
[    0.245301] ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20180313/dsutils-612)
[    0.245302] ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20180313/dsutils-727)
[    0.245367] ACPI Error: Result stack is empty! State=        (ptrval) (20180313/dswstate-65)
[    0.245369] ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20180313/dsutils-612)
[    0.245370] ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20180313/dsutils-727)
[    0.245573] ACPI Error: Result stack is empty! State=        (ptrval) (20180313/dswstate-65)
[    0.245574] ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20180313/dsutils-612)
[    0.245576] ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20180313/dsutils-727)
[    0.245646] ACPI Error: Result stack is empty! State=        (ptrval) (20180313/dswstate-65)
[    0.245647] ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20180313/dsutils-612)
[    0.245648] ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20180313/dsutils-727)
[    0.245914] ACPI Error: Result stack is empty! State=        (ptrval) (20180313/dswstate-65)
[    0.245915] ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20180313/dsutils-612)
[    0.245917] ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20180313/dsutils-727)
[    0.245919] ACPI Error: Result stack is empty! State=        (ptrval) (20180313/dswstate-65)
[    0.245921] ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20180313/dsutils-612)
[    0.245922] ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20180313/dsutils-727)
[    0.246625] ACPI Error: Result stack is empty! State=        (ptrval) (20180313/dswstate-65)
[    0.246627] ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20180313/dsutils-612)
[    0.246628] ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20180313/dsutils-727)
[    0.246631] ACPI Error: Result stack is empty! State=        (ptrval) (20180313/dswstate-65)
[    0.246632] ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20180313/dsutils-612)
[    0.246634] ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20180313/dsutils-727)
[    0.251964] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.256101] ACPI: Dynamic OEM Table Load:
[    0.256101] ACPI: SSDT 0xFFFF88040C359000 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.256228] ACPI: Dynamic OEM Table Load:
[    0.256228] ACPI: SSDT 0xFFFF88040C131800 0005AA (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.257070] ACPI: Dynamic OEM Table Load:
[    0.257073] ACPI: SSDT 0xFFFF88040C356600 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.257324] ACPI: Interpreter enabled
[    0.257345] ACPI: (supports S0 S3 S4 S5)
[    0.257345] ACPI: Using IOAPIC for interrupt routing
[    0.257364] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.257606] ACPI: Enabled 10 GPEs in block 00 to 3F
[    0.258277] ACPI: Power Resource [PG00] (on)
[    0.258486] ACPI: Power Resource [PG01] (on)
[    0.258688] ACPI: Power Resource [PG02] (on)
[    0.264451] ACPI: Power Resource [FN00] (off)
[    0.264502] ACPI: Power Resource [FN01] (off)
[    0.264553] ACPI: Power Resource [FN02] (off)
[    0.264603] ACPI: Power Resource [FN03] (off)
[    0.264652] ACPI: Power Resource [FN04] (off)
[    0.265491] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.265495] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.266026] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.266507] PCI host bridge to bus 0000:00
[    0.266509] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.266510] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.266511] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.266512] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.266513] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.266514] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.266515] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.266516] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[    0.266518] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.266523] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    0.266595] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    0.266626] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.266729] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
[    0.266748] pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit]
[    0.266802] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.266862] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
[    0.266882] pci 0000:00:16.0: reg 0x10: [mem 0xf7f19000-0xf7f1900f 64bit]
[    0.266938] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.267016] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
[    0.267036] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f17000-0xf7f173ff]
[    0.267111] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.267175] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
[    0.267192] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f10000-0xf7f13fff 64bit]
[    0.267246] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.267315] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
[    0.267379] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.267395] pci 0000:00:1c.0: Enabling MPC IRBNCE
[    0.267397] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[    0.267482] pci 0000:00:1c.2: [8086:8c94] type 01 class 0x060400
[    0.267547] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.267562] pci 0000:00:1c.2: Enabling MPC IRBNCE
[    0.267563] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
[    0.267646] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
[    0.267710] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.267804] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
[    0.267824] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f16000-0xf7f163ff]
[    0.267899] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.267965] pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
[    0.268116] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
[    0.268131] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
[    0.268138] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
[    0.268144] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
[    0.268151] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
[    0.268157] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.268164] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f15000-0xf7f157ff]
[    0.268195] pci 0000:00:1f.2: PME# supported from D3hot
[    0.268250] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
[    0.268267] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f14000-0xf7f140ff 64bit]
[    0.268285] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.268380] pci 0000:01:00.0: [1002:6811] type 00 class 0x030000
[    0.268403] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.268412] pci 0000:01:00.0: reg 0x18: [mem 0xf7e00000-0xf7e3ffff 64bit]
[    0.268419] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.268431] pci 0000:01:00.0: reg 0x30: [mem 0xf7e40000-0xf7e5ffff pref]
[    0.268443] pci 0000:01:00.0: BAR 0: assigned to efifb
[    0.268485] pci 0000:01:00.0: supports D1 D2
[    0.268486] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[    0.268544] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
[    0.268563] pci 0000:01:00.1: reg 0x10: [mem 0xf7e60000-0xf7e63fff 64bit]
[    0.268633] pci 0000:01:00.1: supports D1 D2
[    0.268694] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.268696] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.268698] pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.268700] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.268747] acpiphp: Slot [1] registered
[    0.268752] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.268816] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.268844] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.268871] pci 0000:03:00.0: reg 0x18: [mem 0xf7d00000-0xf7d00fff 64bit]
[    0.268888] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.268982] pci 0000:03:00.0: supports D1 D2
[    0.268983] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.269095] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.269098] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.269101] pci 0000:00:1c.2:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.269106] pci 0000:00:1c.2:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.269244] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
[    0.269791] pci 0000:00:1c.3: PCI bridge to [bus 04-05] (subtractive decode)
[    0.269799] pci 0000:00:1c.3:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.269800] pci 0000:00:1c.3:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.269801] pci 0000:00:1c.3:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.269802] pci 0000:00:1c.3:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.269803] pci 0000:00:1c.3:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.269804] pci 0000:00:1c.3:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.269805] pci 0000:00:1c.3:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.269806] pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[    0.269913] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[    0.269931] pci 0000:04:00.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.269932] pci 0000:04:00.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.269933] pci 0000:04:00.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.269934] pci 0000:04:00.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.269935] pci 0000:04:00.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.269936] pci 0000:04:00.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.269937] pci 0000:04:00.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.269938] pci 0000:04:00.0:   bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[    0.270459] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.270501] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.270543] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[    0.270585] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.270626] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.270667] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.270708] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[    0.270748] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.271011] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.271011] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.271011] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.271011] vgaarb: loaded
[    0.271053] SCSI subsystem initialized
[    0.272007] libata version 3.00 loaded.
[    0.272017] EDAC MC: Ver: 3.0.0
[    0.272066] Registered efivars operations
[    0.274430] PCI: Using ACPI for IRQ routing
[    0.275643] PCI: pci_cache_line_size set to 64 bytes
[    0.275679] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.275680] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.275681] e820: reserve RAM buffer [mem 0xbc0ba018-0xbfffffff]
[    0.275682] e820: reserve RAM buffer [mem 0xbc0c8018-0xbfffffff]
[    0.275683] e820: reserve RAM buffer [mem 0xbe0f8000-0xbfffffff]
[    0.275684] e820: reserve RAM buffer [mem 0xbe562000-0xbfffffff]
[    0.275684] e820: reserve RAM buffer [mem 0xddab6000-0xdfffffff]
[    0.275685] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[    0.275686] e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
[    0.276000] NetLabel: Initializing
[    0.276000] NetLabel:  domain hash size = 128
[    0.276000] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.276000] NetLabel:  unlabeled traffic allowed by default
[    0.276046] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.276051] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.279010] clocksource: Switched to clocksource tsc-early
[    0.287561] VFS: Disk quotas dquot_6.6.0
[    0.287572] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.287649] AppArmor: AppArmor Filesystem Enabled
[    0.287667] pnp: PnP ACPI init
[    0.287775] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.287778] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.287847] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.287850] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.287864] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.287888] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.287891] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.287986] system 00:04: [io  0x0a00-0x0a1f] has been reserved
[    0.287988] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.287989] system 00:04: [io  0x0a20-0x0a2f] has been reserved
[    0.287991] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.288045] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.288048] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.288218] pnp 00:06: [dma 0 disabled]
[    0.288249] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.288450] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.288452] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.288453] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.288454] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.288455] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.288456] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.288458] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.288459] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.288461] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.288462] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.288463] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.288464] system 00:07: [mem 0xf7ff0000-0xf7ffffff] has been reserved
[    0.288467] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.288594] pnp: PnP ACPI: found 8 devices
[    0.293853] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.293888] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.293890] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.293892] pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.293894] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.293897] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.293905] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.293908] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.293912] pci 0000:00:1c.2:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.293915] pci 0000:00:1c.2:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.293920] pci 0000:04:00.0: PCI bridge to [bus 05]
[    0.293936] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
[    0.293946] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.293947] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.293948] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.293949] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.293950] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.293951] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.293952] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.293953] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xfeafffff window]
[    0.293954] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.293955] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
[    0.293956] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.293957] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.293958] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
[    0.293959] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.293960] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.293961] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.293962] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.293963] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.293964] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.293965] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.293966] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.293967] pci_bus 0000:04: resource 11 [mem 0xe0000000-0xfeafffff window]
[    0.293968] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.293969] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.293970] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.293971] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.293972] pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.293973] pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.293974] pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.293975] pci_bus 0000:05: resource 11 [mem 0xe0000000-0xfeafffff window]
[    0.294050] NET: Registered protocol family 2
[    0.294147] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[    0.294195] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.294386] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.294550] TCP: Hash tables configured (established 131072 bind 65536)
[    0.294576] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.294625] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.294686] NET: Registered protocol family 1
[    0.312074] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x690 took 16835 usecs
[    0.329071] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x690 took 16584 usecs
[    0.329085] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.329089] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
[    0.329127] PCI: CLS 64 bytes, default 64
[    0.329154] Trying to unpack rootfs image as initramfs...
[    0.668476] Freeing initrd memory: 26148K
[    0.668500] DMAR: No ATSR found
[    0.668526] DMAR: dmar0: Using Queued invalidation
[    0.668533] DMAR: Setting RMRR:
[    0.668581] DMAR: Setting identity map for device 0000:00:14.0 [0xdee7b000 - 0xdee89fff]
[    0.668616] DMAR: Setting identity map for device 0000:00:1a.0 [0xdee7b000 - 0xdee89fff]
[    0.668647] DMAR: Setting identity map for device 0000:00:1d.0 [0xdee7b000 - 0xdee89fff]
[    0.668660] DMAR: Prepare 0-16MiB unity mapping for LPC
[    0.668684] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[    0.668694] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    0.668722] iommu: Adding device 0000:00:00.0 to group 0
[    0.668732] iommu: Adding device 0000:00:01.0 to group 1
[    0.668738] iommu: Adding device 0000:00:14.0 to group 2
[    0.668745] iommu: Adding device 0000:00:16.0 to group 3
[    0.668751] iommu: Adding device 0000:00:1a.0 to group 4
[    0.668756] iommu: Adding device 0000:00:1b.0 to group 5
[    0.668762] iommu: Adding device 0000:00:1c.0 to group 6
[    0.668768] iommu: Adding device 0000:00:1c.2 to group 7
[    0.668776] iommu: Adding device 0000:00:1c.3 to group 8
[    0.668783] iommu: Adding device 0000:00:1d.0 to group 9
[    0.668793] iommu: Adding device 0000:00:1f.0 to group 10
[    0.668799] iommu: Adding device 0000:00:1f.2 to group 10
[    0.668804] iommu: Adding device 0000:00:1f.3 to group 10
[    0.668807] iommu: Adding device 0000:01:00.0 to group 1
[    0.668811] iommu: Adding device 0000:01:00.1 to group 1
[    0.668818] iommu: Adding device 0000:03:00.0 to group 11
[    0.668822] iommu: Adding device 0000:04:00.0 to group 8
[    0.670064] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    0.670064] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    0.670065] RAPL PMU: hw unit of domain package 2^-14 Joules
[    0.670065] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    0.670066] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    0.670188] simple-framebuffer simple-framebuffer.0: framebuffer at 0xe0000000, 0x12c000 bytes, mapped to 0x        (ptrval)
[    0.670189] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=640x480x32, linelength=2560
[    0.670669] Console: switching to colour frame buffer device 80x30
[    0.671097] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    0.672099] Initialise system trusted keyrings
[    0.672117] workingset: timestamp_bits=44 max_order=22 bucket_order=0
[    0.673258] SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled
[    0.674025] NET: Registered protocol family 38
[    0.674040] Key type asymmetric registered
[    0.674041] Asymmetric key parser 'x509' registered
[    0.674050] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.674068] io scheduler noop registered
[    0.674069] io scheduler deadline registered (default)
[    0.674098] io scheduler cfq registered
[    0.674099] io scheduler mq-deadline registered (default)
[    0.674099] io scheduler kyber registered
[    0.674113] io scheduler bfq registered
[    0.674532] pcieport 0000:00:01.0: Signaling PME with IRQ 25
[    0.674548] pcieport 0000:00:1c.0: Signaling PME with IRQ 26
[    0.674563] pcieport 0000:00:1c.2: Signaling PME with IRQ 27
[    0.674579] intel_idle: MWAIT substates: 0x42120
[    0.674579] intel_idle: v0.4.1 model 0x3C
[    0.674681] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.674825] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.695348] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.695663] Linux agpgart interface v0.103
[    0.696938] brd: module loaded
[    0.697561] loop: module loaded
[    0.697795] i8042: PNP: No PS/2 controller found.
[    0.697836] mousedev: PS/2 mouse device common for all mice
[    0.697863] rtc_cmos 00:02: RTC can wake from S4
[    0.697980] rtc_cmos 00:02: registered as rtc0
[    0.697989] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.698100] device-mapper: uevent: version 1.0.3
[    0.698146] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    0.698206] device-mapper: multipath round-robin: version 1.2.0 loaded
[    0.698206] device-mapper: multipath queue-length: version 0.2.0 loaded
[    0.698207] device-mapper: multipath service-time: version 0.3.0 loaded
[    0.698216] intel_pstate: Intel P-state driver initializing
[    0.698452] NET: Registered protocol family 10
[    0.698593] Segment Routing with IPv6
[    0.698603] mip6: Mobile IPv6
[    0.698605] NET: Registered protocol family 17
[    0.698628] Key type dns_resolver registered
[    0.698799] microcode: sig=0x306c3, pf=0x2, revision=0x24
[    0.698820] microcode: Microcode Update Driver: v2.2.
[    0.698825] AVX2 version of gcm_enc/dec engaged.
[    0.698826] AES CTR mode by8 optimization enabled
[    0.699059] sched_clock: Marking stable (699056200, 0)->(695087847, 3968353)
[    0.699198] registered taskstats version 1
[    0.699198] Loading compiled-in X.509 certificates
[    0.699337] Btrfs loaded, crc32c=crc32c-intel
[    0.700422] Key type encrypted registered
[    0.700426] AppArmor: AppArmor sha1 policy hashing enabled
[    0.700800] rtc_cmos 00:02: setting system clock to 2018-08-04 17:32:23 UTC (1533403943)
[    0.701914] Freeing unused kernel memory: 1528K
[    0.701915] Write protecting the kernel read-only data: 18432k
[    0.702255] Freeing unused kernel memory: 2008K
[    0.704547] Freeing unused kernel memory: 1504K
[    0.704551] rodata_test: all tests were successful
[    0.716708] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[    0.716858] systemd[1]: Detected architecture x86-64.
[    0.716860] systemd[1]: Running in initial RAM disk.
[    0.718093] random: systemd: uninitialized urandom read (16 bytes read)
[    0.718099] systemd[1]: Initializing machine ID from random generator.
[    0.744779] random: systemd: uninitialized urandom read (16 bytes read)

betterunborn
Posts: 7
Joined: Wed Jul 26, 2017 7:35 pm

Re: Sound output over HDMI lost (Radeon R270)

Sat Aug 04, 2018 5:14 pm

... and pt2

Code: Select all

[    0.744811] systemd[1]: Listening on Journal Audit Socket.
[    0.744851] random: systemd: uninitialized urandom read (16 bytes read)
[    0.744876] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    0.744886] systemd[1]: Reached target Paths.
[    0.744893] systemd[1]: Reached target Timers.
[    0.744901] systemd[1]: Reached target Slices.
[    0.744929] systemd[1]: Listening on udev Kernel Socket.
[    0.844593] ACPI: bus type USB registered
[    0.844609] usbcore: registered new interface driver usbfs
[    0.844614] usbcore: registered new interface driver hub
[    0.844633] usbcore: registered new device driver usb
[    0.845057] ahci 0000:00:1f.2: version 3.0
[    0.845218] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
[    0.845220] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    0.845665] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.846873] ehci-pci: EHCI PCI platform driver
[    0.858470] scsi host0: ahci
[    0.858634] scsi host1: ahci
[    0.859009] scsi host2: ahci
[    0.859872] scsi host3: ahci
[    0.859950] scsi host4: ahci
[    0.860026] scsi host5: ahci
[    0.860066] ata1: SATA max UDMA/133 abar m2048@0xf7f15000 port 0xf7f15100 irq 28
[    0.860068] ata2: SATA max UDMA/133 abar m2048@0xf7f15000 port 0xf7f15180 irq 28
[    0.860069] ata3: DUMMY
[    0.860071] ata4: SATA max UDMA/133 abar m2048@0xf7f15000 port 0xf7f15280 irq 28
[    0.860073] ata5: SATA max UDMA/133 abar m2048@0xf7f15000 port 0xf7f15300 irq 28
[    0.860074] ata6: DUMMY
[    0.860205] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.860210] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.860219] ehci-pci 0000:00:1a.0: debug port 2
[    0.864131] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.864143] ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7f17000
[    0.871039] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.871066] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    0.871068] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.871069] usb usb1: Product: EHCI Host Controller
[    0.871070] usb usb1: Manufacturer: Linux 4.17.11-84.current ehci_hcd
[    0.871071] usb usb1: SerialNumber: 0000:00:1a.0
[    0.871225] hub 1-0:1.0: USB hub found
[    0.871230] hub 1-0:1.0: 2 ports detected
[    0.871400] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.871403] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.871411] ehci-pci 0000:00:1d.0: debug port 2
[    0.875301] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.875309] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f16000
[    0.882040] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.882063] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    0.882064] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.882065] usb usb2: Product: EHCI Host Controller
[    0.882066] usb usb2: Manufacturer: Linux 4.17.11-84.current ehci_hcd
[    0.882067] usb usb2: SerialNumber: 0000:00:1d.0
[    0.882214] hub 2-0:1.0: USB hub found
[    0.882219] hub 2-0:1.0: 2 ports detected
[    0.882409] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.882412] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.883485] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    0.883490] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.883588] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    0.883590] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.883591] usb usb3: Product: xHCI Host Controller
[    0.883591] usb usb3: Manufacturer: Linux 4.17.11-84.current xhci-hcd
[    0.883592] usb usb3: SerialNumber: 0000:00:14.0
[    0.883871] hub 3-0:1.0: USB hub found
[    0.883890] hub 3-0:1.0: 14 ports detected
[    0.884805] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.884808] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.884810] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    0.884840] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17
[    0.884841] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.884842] usb usb4: Product: xHCI Host Controller
[    0.884843] usb usb4: Manufacturer: Linux 4.17.11-84.current xhci-hcd
[    0.884844] usb usb4: SerialNumber: 0000:00:14.0
[    0.884910] hub 4-0:1.0: USB hub found
[    0.884921] hub 4-0:1.0: 6 ports detected
[    1.141743] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.141759] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.141874] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.141888] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.142208] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20180313/psargs-330)
[    1.142213] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20180313/psparse-516)
[    1.142297] ata4.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
[    1.142298] ata4.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.142642] ata4.00: configured for UDMA/133
[    1.142889] ata1.00: ATAPI: HL-DT-ST DVDRAM GH24NSC0, LK00, max UDMA/133
[    1.143428] ata5.00: ATA-9: SanDisk SD8SNAT256G1122, Z2201000, max UDMA/133
[    1.143439] ata5.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.143962] ata2.00: ATAPI: TSSTcorp CDDVDW SH-222BB, SB00, max UDMA/100
[    1.144420] ata1.00: configured for UDMA/133
[    1.144902] ata2.00: configured for UDMA/100
[    1.147110] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20180313/psargs-330)
[    1.147114] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20180313/psparse-516)
[    1.148384] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH24NSC0  LK00 PQ: 0 ANSI: 5
[    1.151177] ata5.00: configured for UDMA/133
[    1.162030] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.178031] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.178118] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[    1.186772] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-222BB  SB00 PQ: 0 ANSI: 5
[    1.190829] usb 4-1: New USB device found, idVendor=174c, idProduct=5106, bcdDevice= 0.01
[    1.190831] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    1.190832] usb 4-1: Product: AS2105
[    1.190833] usb 4-1: Manufacturer: ASMedia
[    1.190834] usb 4-1: SerialNumber:      WD-WX61A95D4KJA
[    1.193302] usb-storage 4-1:1.0: USB Mass Storage device detected
[    1.193434] scsi host6: usb-storage 4-1:1.0
[    1.193481] usbcore: registered new interface driver usb-storage
[    1.193791] usbcore: registered new interface driver uas
[    1.218098] scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG SSD 830  3B1Q PQ: 0 ANSI: 5
[    1.218277] scsi 4:0:0:0: Direct-Access     ATA      SanDisk SD8SNAT2 1000 PQ: 0 ANSI: 5
[    1.221537] sd 3:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    1.221538] sd 4:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.221542] sd 4:0:0:0: [sdb] Write Protect is off
[    1.221543] sd 3:0:0:0: [sda] Write Protect is off
[    1.221544] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.221544] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.221549] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.221550] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.223366]  sda: sda1 sda2
[    1.223529] sd 3:0:0:0: [sda] Attached SCSI disk
[    1.223796]  sdb: sdb1 sdb2 sdb3 sdb4
[    1.223949] sd 4:0:0:0: [sdb] Attached SCSI disk
[    1.242515] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.242517] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.242612] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.247524] random: fast init done
[    1.283835] sr 1:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.283929] sr 1:0:0:0: Attached scsi CD-ROM sr1
[    1.290454] usb 1-1: New USB device found, idVendor=8087, idProduct=8009, bcdDevice= 0.00
[    1.290456] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.290671] hub 1-1:1.0: USB hub found
[    1.290791] hub 1-1:1.0: 6 ports detected
[    1.304038] usb 3-4: new high-speed USB device number 2 using xhci_hcd
[    1.307456] usb 2-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.00
[    1.307458] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.307691] hub 2-1:1.0: USB hub found
[    1.307787] hub 2-1:1.0: 8 ports detected
[    1.431858] usb 3-4: New USB device found, idVendor=152e, idProduct=2571, bcdDevice= 1.00
[    1.431860] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.431861] usb 3-4: Product: Slim Ext Blu-ray
[    1.431862] usb 3-4: Manufacturer: HLDS Inc
[    1.431863] usb 3-4: SerialNumber: BE34000000000651
[    1.432964] usb-storage 3-4:1.0: USB Mass Storage device detected
[    1.433025] scsi host7: usb-storage 3-4:1.0
[    1.547039] usb 3-9: new low-speed USB device number 3 using xhci_hcd
[    1.592786] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    1.679365] usb 3-9: New USB device found, idVendor=0458, idProduct=0056, bcdDevice= 1.00
[    1.679367] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.679369] usb 3-9: Product: 4D Scroll Mouse
[    1.679370] usb 3-9: Manufacturer: Genius
[    1.695681] systemd-journald[206]: Received SIGTERM from PID 1 (systemd).
[    1.697028] tsc: Refined TSC clocksource calibration: 3198.147 MHz
[    1.697035] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e1973af5de, max_idle_ns: 440795368835 ns
[    1.697109] clocksource: Switched to clocksource tsc
[    1.718091] systemd: 15 output lines suppressed due to ratelimiting
[    1.776509] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[    1.783234] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[    1.795048] usb 3-10: new full-speed USB device number 4 using xhci_hcd
[    1.795185] systemd[1]: Detected architecture x86-64.
[    1.795616] systemd[1]: Set hostname to <solus>.
[    1.868884] systemd[1]: Stopped Switch Root.
[    1.868964] systemd[1]: systemd-journald.service: Service has no hold-off time, scheduling restart.
[    1.869015] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[    1.869023] systemd[1]: Stopped Journal Service.
[    1.869620] systemd[1]: Starting Journal Service...
[    1.869690] systemd[1]: Listening on udev Control Socket.
[    1.869728] systemd[1]: Listening on udev Kernel Socket.
[    1.872749] audit: type=1305 audit(1533396744.670:2): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 res=1
[    1.888758] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.888778] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.888795] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    1.888815] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    1.890660] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    1.900628] systemd-journald[439]: Received request to flush runtime journal from PID 1
[    1.922173] usb 3-10: New USB device found, idVendor=195d, idProduct=1411, bcdDevice= 0.23
[    1.922175] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.922176] usb 3-10: Product: Mionix Wei Gaming Keyboard
[    1.922177] usb 3-10: Manufacturer: Mionix Wei
[    1.947801] audit: type=1400 audit(1533396744.745:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="syslogd" pid=462 comm="apparmor_parser"
[    1.947803] audit: type=1300 audit(1533396744.745:3): arch=c000003e syscall=1 success=yes exit=35273 a0=6 a1=120bc80 a2=89c9 a3=0 items=0 ppid=461 pid=462 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="apparmor_parser" exe="/sbin/apparmor_parser" key=(null)
[    1.947805] audit: type=1327 audit(1533396744.745:3): proctitle=2F7362696E2F61707061726D6F725F706172736572002D7242002F7661722F63616368652F61612D6C736D2D686F6F6B002D2D61626F72742D6F6E2D6572726F72
[    1.947807] audit: type=1400 audit(1533396744.745:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="klogd" pid=464 comm="apparmor_parser"
[    1.947809] audit: type=1300 audit(1533396744.745:4): arch=c000003e syscall=1 success=yes exit=21625 a0=6 a1=120bc80 a2=5479 a3=0 items=0 ppid=461 pid=464 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="apparmor_parser" exe="/sbin/apparmor_parser" key=(null)
[    1.947810] audit: type=1327 audit(1533396744.745:4): proctitle=2F7362696E2F61707061726D6F725F706172736572002D7242002F7661722F63616368652F61612D6C736D2D686F6F6B002D2D61626F72742D6F6E2D6572726F72
[    1.947896] audit: type=1400 audit(1533396744.745:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=465 comm="apparmor_parser"
[    1.947902] audit: type=1300 audit(1533396744.745:5): arch=c000003e syscall=1 success=yes exit=32097 a0=6 a1=120bc80 a2=7d61 a3=0 items=0 ppid=461 pid=465 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="apparmor_parser" exe="/sbin/apparmor_parser" key=(null)
[    2.029867] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    2.029876] ACPI: Power Button [PWRB]
[    2.029913] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    2.029921] ACPI: Power Button [PWRF]
[    2.052450] thermal LNXTHERM:00: registered as thermal_zone0
[    2.052452] ACPI: Thermal Zone [TZ00] (28 C)
[    2.052646] thermal LNXTHERM:01: registered as thermal_zone1
[    2.052647] ACPI: Thermal Zone [TZ01] (30 C)
[    2.060510] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.061486] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20180313/utaddress-213)
[    2.061490] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.061493] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20180313/utaddress-213)
[    2.061496] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.061496] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20180313/utaddress-213)
[    2.061499] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20180313/utaddress-213)
[    2.061501] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.061501] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20180313/utaddress-213)
[    2.061503] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20180313/utaddress-213)
[    2.061505] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.061506] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.070879] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    2.070904] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    2.073972] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.082199] EFI Variables Facility v0.08 2004-May-17
[    2.084560] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0x        (ptrval), 14:dd:a9:db:b9:b9, XID 0c000800 IRQ 31
[    2.084562] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.092244] hidraw: raw HID events driver (C) Jiri Kosina
[    2.094392] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    2.095280] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    2.095282] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[    2.101191] usbcore: registered new interface driver usbhid
[    2.101193] usbhid: USB HID core driver
[    2.106078] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input2
[    2.106094] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input3
[    2.106108] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input4
[    2.106121] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input5
[    2.106135] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
[    2.106148] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[    2.111585] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    2.111587] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.111589] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    2.111589] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    2.111590] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[    2.111591] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    2.111592] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    2.111594] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    2.111595] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    2.125558] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    2.125574] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    2.125588] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    2.125603] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    2.125618] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    2.144331] intel_rapl: Found RAPL domain package
[    2.144332] intel_rapl: Found RAPL domain core
[    2.144334] intel_rapl: Found RAPL domain dram
[    2.150613] asus_wmi: ASUS WMI generic driver loaded
[    2.150806] iTCO_vendor_support: vendor-support=0
[    2.152118] asus_wmi: Initialization: 0x0
[    2.152138] asus_wmi: BIOS WMI version: 0.9
[    2.152165] asus_wmi: SFUN value: 0x0
[    2.152451] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input13
[    2.152523] asus_wmi: Number of fans: 1
[    2.153030] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    2.153058] iTCO_wdt: Found a 9 Series TCO device (Version=2, TCOBASE=0x1860)
[    2.153504] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.156605] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    2.167669] input: Genius 4D Scroll Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/0003:0458:0056.0001/input/input14
[    2.169247] [drm] radeon kernel modesetting enabled.
[    2.169278] checking generic (e0000000 12c000) vs hw (e0000000 10000000)
[    2.169279] fb: switching to radeondrmfb from simple
[    2.169302] Console: switching to colour dummy device 80x25
[    2.169544] radeon 0000:01:00.0: SI support disabled by module param
[    2.208296] scsi 6:0:0:0: Direct-Access     WDC WD10 JPVX-22JC3T0     01.0 PQ: 0 ANSI: 5
[    2.219155] sd 6:0:0:0: Attached scsi generic sg4 type 0
[    2.219361] hid-generic 0003:0458:0056.0001: input,hidraw0: USB HID v1.10 Mouse [Genius 4D Scroll Mouse] on usb-0000:00:14.0-9/input0
[    2.219361] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.219487] input: Mionix Wei Mionix Wei Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:195D:1411.0002/input/input15
[    2.219563] sd 6:0:0:0: [sdc] Write Protect is off
[    2.219565] sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
[    2.219758] sd 6:0:0:0: [sdc] No Caching mode page found
[    2.219759] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[    2.230454] [drm] amdgpu kernel modesetting enabled.
[    2.234071] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    2.234072] AMD IOMMUv2 functionality not available on this system
[    2.237630] CRAT table not found
[    2.237631] Virtual CRAT table created for CPU
[    2.237632] Parsing CRAT table with 1 nodes
[    2.237633] Creating topology SYSFS entries
[    2.237641] Topology: Add CPU node
[    2.237641] Finished initializing topology
[    2.237680] kfd kfd: Initialized module
[    2.238061] [drm] initializing kernel modesetting (PITCAIRN 0x1002:0x6811 0x1787:0x201C 0x00).
[    2.238069] [drm] register mmio base: 0xF7E00000
[    2.238070] [drm] register mmio size: 262144
[    2.238073] [drm] probing gen 2 caps for device 8086:c01 = 261ad03/e
[    2.238074] [drm] probing mlw for device 8086:c01 = 261ad03
[    2.238075] [drm] add ip block number 0 <si_common>
[    2.238076] [drm] add ip block number 1 <gmc_v6_0>
[    2.238076] [drm] add ip block number 2 <si_ih>
[    2.238077] [drm] add ip block number 3 <si_dpm>
[    2.238078] [drm] add ip block number 4 <dce_v6_0>
[    2.238078] [drm] add ip block number 5 <gfx_v6_0>
[    2.238079] [drm] add ip block number 6 <si_dma>
[    2.248280] [drm] BIOS signature incorrect 0 0
[    2.248290] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[    2.248295] caller pci_map_rom+0x58/0xe0 mapping multiple BARs
[    2.248300] amdgpu 0000:01:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
[    2.248345] ATOM BIOS: 113-T22G02-101
[    2.248485] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[    2.250795] amdgpu 0000:01:00.0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
[    2.250796] amdgpu 0000:01:00.0: GTT: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[    2.250801] [drm] Detected VRAM RAM=2048M, BAR=256M
[    2.250802] [drm] RAM width 256bits GDDR5
[    2.250850] [TTM] Zone  kernel: Available graphics memory: 8216984 kiB
[    2.250851] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    2.250851] [TTM] Initializing pool allocator
[    2.250854] [TTM] Initializing DMA pool allocator
[    2.251076] [drm] amdgpu: 2048M of VRAM memory ready
[    2.251079] [drm] amdgpu: 3072M of GTT memory ready.
[    2.251128] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    2.251752] amdgpu 0000:01:00.0: PCIE GART of 1024M enabled (table at 0x000000F400040000).
[    2.251818] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.251818] [drm] Driver supports precise vblank timestamp query.
[    2.252365] [drm] Internal thermal controller with fan control
[    2.252374] [drm] amdgpu: dpm initialized
[    2.252484] [drm] AMDGPU Display Connectors
[    2.252485] [drm] Connector 0:
[    2.252485] [drm]   DP-1
[    2.252486] [drm]   HPD4
[    2.252487] [drm]   DDC: 0x194c 0x194c 0x194d 0x194d 0x194e 0x194e 0x194f 0x194f
[    2.252487] [drm]   Encoders:
[    2.252487] [drm]     DFP1: INTERNAL_UNIPHY2
[    2.252488] [drm] Connector 1:
[    2.252488] [drm]   DP-2
[    2.252489] [drm]   HPD5
[    2.252490] [drm]   DDC: 0x1950 0x1950 0x1951 0x1951 0x1952 0x1952 0x1953 0x1953
[    2.252490] [drm]   Encoders:
[    2.252490] [drm]     DFP2: INTERNAL_UNIPHY2
[    2.252491] [drm] Connector 2:
[    2.252491] [drm]   HDMI-A-1
[    2.252491] [drm]   HPD1
[    2.252492] [drm]   DDC: 0x1954 0x1954 0x1955 0x1955 0x1956 0x1956 0x1957 0x1957
[    2.252493] [drm]   Encoders:
[    2.252493] [drm]     DFP3: INTERNAL_UNIPHY1
[    2.252493] [drm] Connector 3:
[    2.252494] [drm]   DVI-I-1
[    2.252494] [drm]   HPD6
[    2.252495] [drm]   DDC: 0x1960 0x1960 0x1961 0x1961 0x1962 0x1962 0x1963 0x1963
[    2.252495] [drm]   Encoders:
[    2.252496] [drm]     DFP4: INTERNAL_UNIPHY
[    2.252496] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.254135] [drm] PCIE gen 3 link speeds already enabled
[    2.271295] hid-generic 0003:195D:1411.0002: input,hidraw1: USB HID v1.11 Keyboard [Mionix Wei Mionix Wei Gaming Keyboard] on usb-0000:00:14.0-10/input0
[    2.271518] input: Mionix Wei Mionix Wei Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.1/0003:195D:1411.0003/input/input16
[    2.312306]  sdc: sdc1
[    2.313142] sd 6:0:0:0: [sdc] Attached SCSI disk
[    2.323278] hid-generic 0003:195D:1411.0003: input,hiddev0,hidraw2: USB HID v1.11 Mouse [Mionix Wei Mionix Wei Gaming Keyboard] on usb-0000:00:14.0-10/input1
[    2.323381] input: Mionix Wei Mionix Wei Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.2/0003:195D:1411.0004/input/input17
[    2.348199] FS-Cache: Loaded
[    2.358427] RPC: Registered named UNIX socket transport module.
[    2.358428] RPC: Registered udp transport module.
[    2.358429] RPC: Registered tcp transport module.
[    2.358429] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.369507] FS-Cache: Netfs 'nfs' registered for caching
[    2.373826] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    2.375141] hid-generic 0003:195D:1411.0004: input,hidraw3: USB HID v1.11 Keyboard [Mionix Wei Mionix Wei Gaming Keyboard] on usb-0000:00:14.0-10/input2
[    2.386769] NFS: Registering the id_resolver key type
[    2.386775] Key type id_resolver registered
[    2.386776] Key type id_legacy registered
[    2.398109] FS-Cache: Duplicate cookie detected
[    2.398111] FS-Cache: O-cookie c=        (ptrval) [p=        (ptrval) fl=222 nc=0 na=1]
[    2.398112] FS-Cache: O-cookie d=        (ptrval) n=        (ptrval)
[    2.398113] FS-Cache: O-key=[10] '040002000801c0a800de'
[    2.398117] FS-Cache: N-cookie c=        (ptrval) [p=        (ptrval) fl=2 nc=0 na=1]
[    2.398117] FS-Cache: N-cookie d=        (ptrval) n=        (ptrval)
[    2.398118] FS-Cache: N-key=[10] '040002000801c0a800de'
[    2.446242] r8169 0000:03:00.0 enp3s0: link down
[    2.446324] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    2.446950] r8169 0000:03:00.0 enp3s0: link down
[    2.466073] scsi 7:0:0:0: CD-ROM            HL-DT-ST BD-RE BP55EB40   1.00 PQ: 0 ANSI: 0
[    2.479664] sr 7:0:0:0: [sr2] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.479748] sr 7:0:0:0: Attached scsi CD-ROM sr2
[    2.479795] sr 7:0:0:0: Attached scsi generic sg5 type 5
[    2.647544] fuse init (API version 7.26)
[    2.679883] [drm] fb mappable at 0xE0243000
[    2.679884] [drm] vram apper at 0xE0000000
[    2.679884] [drm] size 8294400
[    2.679885] [drm] fb depth is 24
[    2.679885] [drm]    pitch is 7680
[    2.679949] fbcon: amdgpudrmfb (fb0) is primary device
[    2.680040] Console: switching to colour frame buffer device 240x67
[    2.680045] amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
[    2.687177] [drm] Initialized amdgpu 3.25.0 20150101 for 0000:01:00.0 on minor 0
[    4.314619] random: crng init done
[    4.314620] random: 7 urandom warning(s) missed due to ratelimiting
[    5.053198] r8169 0000:03:00.0 enp3s0: link up
[    5.053205] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[    5.591907] rfkill: input handler disabled
[    7.425771] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)

Return to “Hardware”